CBSE Class 12 Engineering Graphics Board Question Paper 2024 Set 4
This is the CBSE Class 12 Engineering Graphics Previous Year Question Paper for the 2024 board examinations, specifically Set 4. The paper is in Hindi and is designed to assess students' understanding of engineering drawing principles and techniques. It contains 23 questions and is to be completed within a duration of 3 hours, with a maximum mark of 70. The paper includes a 15-minute reading time. It follows the S.P.:46-2003 revised code with the first angle projection method. Solving this authentic board question paper is crucial for students to understand the exam pattern, identify important topics, and enhance their preparation for the final exams.
Quick info
| Board | CBSE |
|---|---|
| Class | 12 |
| Subject | Engineering Graphics |
| Session | 2024 |
| Language | Hindi |
| Type | Previous Year Question Paper |
| Exam type | Board Exam |
Paper pattern
The question paper contains 23 questions and is to be completed in 3 hours, with a maximum mark of 70.
Topics covered
Paper topics
- Orthographic Projection
- Isometric Projection
- Projection of Solids
- Sectional Views
- Scales
- First Angle Projection
- Engineering Drawing Standards
Important topics
- Orthographic Projection
- Isometric Projection
- Scales
- First Angle Projection
PDF preview
Read page by page below. PDF is streamed from the official NCERT website — no download button on this page.
Question paper text
Series &RQPS
रोल नं.
SET-4
प्रश्न-पत्र कोड Q.P. Code 68
परीक्षार्थी प्रश्न-पत्र कोड को उत्तर-पुस्तिका के
मुख-पृष्ठ पर अवश्य लिखें।
Candidates must write the Q.P. Code
on the title page of the answer-book.
Roll No.
्रकृपया जाँच कर लें कि इस प्रश्न-पत्र में मुद्रित पृष्ठ <math>{\bf 23}</math> हैं।
कृपया जाँच कर लें कि इस प्रश्न-पत्र में 23 प्रश्न हैं।
प्रश्न-पत्र में दाहिने हाथ की ओर दिए गए प्रश्न-पत्र कोड को परीक्षार्थी उत्तर-पुस्तिका के मुख-पृष्ठ पर लिखें।
कृपया प्रश्न का उत्तर लिखना शुरू करने से पहले, उत्तर-पुस्तिका में प्रश्न का क्रमांक अवश्य लिखें।
इस प्रश्न-पत्र को पढ़ने के लिए 15 मिनट का समय दिया गया है। प्रश्न-पत्र का वितरण पूर्वाह्न में 10.15 बजे किया जाएगा। 10.15 बजे से 10.30 बजे तक परीक्षार्थी केवल प्रश्न-पत्र को पढ़ेंगे और इस अवधि के दौरान वे उत्तर-पुस्तिका पर कोई उत्तर नहीं लिखेंगे।
Please check that this question paper contains 23 printed pages.
Please check that this question paper contains 23 questions.
Q.P. Code given on the right hand side of the question paper should be written on the title page of the answer-book by the candidate.
Please write down the serial number of the question in the answer- book before attempting it.
15 minute time has been allotted to read this question paper. The question paper will be distributed at 10.15 a.m. From 10.15 a.m. to 10.30 a.m., the candidates will read the question paper only and will not write any answer on the answer-book during this period.
इंजीनियरी ग्राफ़िक्स ENGINEERING GRAPHICS
निर्धारित समय: 3 घण्टे
Time allowed: 3 hours
अधिकतम अंक : 70
Maximum Marks: 70 682 P.T.O.
Page 1 248
सामान्य निर्देश:
(i) सभी प्रश्नों के उत्तर दीजिए।
- यदि आवश्यक हो, तो ड्राइंग शीट के दोनों पक्षों का प्रयोग करें।
- सभी परिमाप मिलीमीटर में हैं।
- यदि कोई पैमाइश अनुपस्थित या असंगत हो, तो उसके लिए उपयुक्त मान की कल्पना की जाए।
- एस. पी.:46-2003 संशोधित कोड (प्रक्षेपण के प्रथम कोण विधि के साथ) का पालन करें।
- प्रश्न 21 के किसी भी दृश्य में छिपे किनारों अथवा रेखाओं की आवश्यकता नहीं है।
- प्रश्न 23 में अछेदित दृश्यों में छिपे किनारों अथवा रेखाओं को दिखाएँ।
<math>20 \times 1 = 20</math>
खण्ड – क
प्र.-1 से प्र.-20 : निम्नलिखित बहुविकल्पीय प्रश्नों के उत्तर दीजिए । सही उत्तर अपनी ड्राइंग शीट पर आलेखित कीजिए।
- सचित्र प्रक्षेपण के तीन रूप हैं
- परोक्ष, परिप्रेक्ष्य और रेखीय
- अक्षमितीय, परोक्ष और परिप्रेक्य
- परिप्रेक्ष्य, रेखीय और तिरछा
- अक्षमितीय, समायोजित और समकक्ष
- यदि एक सममितीय रेखांकन में सममितीय पैमाने का उपयोग किया जाता है तब रेखांकन कहलाता है ______
- सममितीय दृश्य (B) सममितीय प्रक्षेप
- लम्बकोणीय दृश्य (D) अनुभागीय दृश्य
- लम्बकोणीय प्रक्षेप में यदि एक वस्तु द्वितीय चतुर्भाग में स्थित है, उसकी स्थिति उस प्लेन के संदर्भ में होगी
- वी.पी. के सामने और एच.पी. के नीचे (B) वी.पी. के पीछे और एच.पी. के ऊपर
- वी.पी. के सामने और एच.पी. के ऊपर (D) वी.पी. के पीछे और एच.पी. के नीचे
- _____ के साथ रेखांकन सममितीय है।
- कम किये हुए पैमाने (B) वास्तविक पैमाने
- वर्नीयर पैमाने (D) सममितीय पैमाने
682 Page 2
Frequently asked questions
What is this document?
This is the CBSE Class 12 Engineering Graphics Previous Year Board Question Paper for the 2024 examination, Set 4.
What is the duration and maximum marks for the exam?
The exam is for 3 hours and carries a maximum of 70 marks.
What projection method is followed?
The paper follows the S.P.:46-2003 revised code with the first angle projection method.
How does solving previous year papers help?
Solving previous year question papers helps students understand the board pattern, identify important topics, and improve their scores.
What is the structure of the paper?
The paper contains 23 questions, including multiple-choice questions in Section A, and is designed for practice in engineering drawing.
Content reviewed by the NCERT Help team. Editorial Team and update policy
Question Papers PDF on NCERT Help. URL unchanged for search indexing.