Home UP BOARD Question Papers NCERT Solutions Sample Papers CBSE Notes NCERT Books CBSE Syllabus

the Solid State Class 12 Notes For Chemistry Chapter 1

chemistry notes for class 12 chapter 1: the solid state download pdf, the solid state 12 notes, class 12 chemistry notes, the solid state class 12, the solid state class 12 notes, class 12 the solid state, note chemistry, chemistry notes, the solid state, class 12 cchemistry chapter 1 notes, 12th standard chemistry notes, 12th std chemistry notes, class 12 chemistry notes chapter 1, the solid state chapter class 12 notes

NCERT Notes For Class 12 Chemistry

Chapter 1: The Solid State

Solids

Solids are the chemical substances which are characterised by define shape and volume, rigidity, high density, low compressibility. The constituent particles (atoms, molecules or ions) are closely packed and held together by strong interparticle forces

Types of Solids

The solids are of two types : Crystalline solids and amorphous solids.

Distinction Between Crystalline and Amorphous Solids

S.No Crystalline solid

Amorphous solids

1 These have definite and regular arrangement of the constituent particles in space. These doesn’t have any regular arrangement of the constituent particles in space.
2 These are true solids. Theseare super cooled liquids or pseudo soilds.
3 These have long order arrangement of the particles. These have short order arrangement of particle.
4 These are anisotropic in nature, i.e., their physical properties are different in different directions. These are isotropic in nature i.e., their physical properties are same in all the directions.
5 They have sharp melting points. They melt over a certain range of temperature.
6 They undergo a clean cleavage when cut. They undergo irregular cleavage when cut.

types of Crystalline solid

Structure Determination by X-ray Diffraction (Bragg’s Equation)

When a beam of X-rays falls on a crystal plane composed of regularly arranged atoms or ions, the X-rays are diffracted. If the waves are in phase after reflection, the difference in distance travelled by the two rays ti.e., path difference) must be equal to an integral number of Wavelength, nλ for constructive.

Structure Determination by X-ray Diffraction

Thus, path difference = WY + YZ

= XY sin θ + xy sin θ
= 2 XY sin θ = 2d sin θ
∴ nλ = 2d sin θ

This equation is called Bragg’s equation.

Where, n = 1. 2, 3… (diffraction order)

λ = wavelength of X·rays incident on crystal

d = distance between atomic planes

θ = angle at which interference occurs.

Unit Cell

The smallest geometrical portion of the crystal lattice which can be used as repetitive unit to build up the whole crystal is called unit cell.

Types of Unit Cell
(i) Simple or primitive Unit cell

In which the particles are present at the corners only.

Simple or primitive Unit cell

(ii) Face centred unit cell

In which the particles are present at the corners as well as at the centre of each of six faces

Face centred unit cell

(iii) Body centred unit cell

In which the particles are present at the corners as well as at the centre of the unit cell.

Body centred unit cell

(iv) End centred unit cell

In which the particles are present at the corners and at the centre of two opposite faces.

End centred unit cell

Number of Particles Per Unit Cell

Number of Particles Per Unit Cell

Seven Crystal Systems

There are about 230 crystal forms, which have been grouped into 14 types of space lattices, called Bravais Lattices, on the basis of their symmetry and seven different crystal systems on the basis of interfacial angles and axes.

Seven Crystal Systems

Seven Crystal Systems

Packing Fraction

It is defined as the ratio of the volume of the unit cell that is occupied by the spheres to the volume of the unit cell.

(i) Primitive cubic unit cell

Atoms touch each other along edges.

Hence, d = a or r = a / 2

(r = radius of atom and a = edge length)

Therefore, PF = 4 / 3 πr3 / (2r)3 = 0.524 or 52.4%

(ii) Face centred cubic unit

cell Atoms touch each other along the face diagonal.

Hence, d = a / √2

or r = √2a / 4

Therefore; PF = 4 * 4 / 3 πr3 / (4r / √2)r3 = 0.74 or 74%

(iii) Body centred cubic unit

cell Atoms touch each other along the body diagonal.

Hence, √3a / 2
or r = √3a / 4

Therefore; PF = 2 * 4 / 3 πr3 / (4r / √3)r3 = 0.68 or 68%

Coordination Number

It is defined as the number of particles immediately adjacent to each particle in the crystal lattice.

[In simple cubic lattice, CN is 6, in body centred lattice, CN is 8 and in face centred cubic lattice, CN is 12].

High pressure increases CN and high temperature decreases the CN.

Close Packing in Crystals

Two Dimensional Packing of Constituent Particles
(i) Square close packing

Space occupied by spheres is 52.4%.

Square close packing

(ii) Hexagonal close packing

Space occupied by spheres is 60.4%.Hence. It is more efficient.

Hexagonal close packing

Three Dimensional Packing of Constituent Particles

(i) ABAB arrangement gives hexagonal close packing (hcp).
(ii) ABCABC arrangement gives cubic close packing or face centred CUbIC packing (ccp or fcc).

• In both these arrangements 740/0 space is occupied
• Coordination number in hop and ccp arrangement is 12 while in bcc arrangement, it is 8.
• Close packing of atoms in cubic structure = fcc > bcc > sc.
• All noble gases have ccp structure except He (hcp structure).

Void or Space or Holes

• Empty or vacant space present bet veen spheres of a unit cell, is called void or space or hole or interstitial void. When particles are closed packed resulting in either cpp or hcp structure, two types of voids are generated:
• Tetrahedral voids
are holes or voids surrounded by four spheres Present at the corner of a tetrahedron. Coordination number of a tetrahedral void is 4.

Tetrahedral voids

• Octahedral voids are holes surrounded by six spheres located on a regular tetrahedron. Coordination number of octahedral void is 6.

Octahedral voids

[The number of octahedral voids present in a lattice is equal to the number of close packed particles. The number of tetrahedral voids present in a lattice is twice to the number of close packed particles.]

Density of Unit Cell (d)

Density of unit ce11 = mass of unit cell / volume of unit cell

d = Z * M / a3 = ZM / a3 * NA

(The density of the unit cell is same as the density of the substance.)

where, d = density of unit cell

M = molecular weight

Z = no. of atoms per unit cell

NA = Avogadro number

a = edge length of unit cell.

The Structure of Ionic Crystals

The ionic radius ratios of cation and anion, play a very important role in giving a clue to the nature of the crystal structure of ionic substances.

Radius Ratio and Crystal Structure

The Structure of Ionic Crystals

Ionic crystals may be of two types

(i)AB type and
(ii) A2B or AB2

Structure of Ionic Crystals

Structure of Ionic Crystals

On applying pressure NaC} structure (6 : 6 coordination) changes into CsCI structure (8 : 8 coordination) and reverse of this occur at high temperature (760 K).

Imperfections in Solids

• In a crystalline solid, the atoms, ions and molecules are arranged in a Definite repeating pattern, but some defects may occur in the pattern. derivations from perfect arrangement may occur due to rapid cooling or presence of additional particles.
• The defects are of two types, namely point defects and line defects.

Point Defects

Point defects are the irregularities or deviations from ideal arrangement around a point or an atom in a crystalline substance Point defects can be classified into three types : (1) psychometric defects (2) impurity defects (3) non–stoichiometric defects

1. Stoichiometric Defect

These are point defects that do not disturb’ the -stoichiometric of the solid. They are also called intrinsic or thermodynamic defects. In ionic solids, basically these are of two types, Frankel defect and Schottky defect

Stoichiometric Defect

AgBr has both Schottky and Frenkel defects. Frenkel defects are not found in pure alkali metal halides because cations are of large size.

2. Impurity Defect

• It arises when foreign atoms or ions aloe present in the lattice. In case of ionic compounds, the impurity 1S also ionic in nature. When the impurity has the same charge as the host ion. it just substitutes some of the host ions.
• Impurity defects can also be introduced by adding impurity ions having different charge than host ions. e.g. molten NaCl containing a little amount of SrCI2 is crystallised. In such cases,
• Cationic vacancies produced = [number of cations of higher valence * Difference in valence of the host cation and cation of higher valence

3. Non-Stoichiometric Defect

Non-stoichiometric crystals are those which do not obey the law of constant proportions. The numbers of positive and negative ions present in such compounds are different from those expected from their ideal chemical formulae. However, the crystal as a whole in neutral.

Types of n-stoichiometric defects are as follows:

(i) Met excess defect

Metal excess defect due to anionic vacancies: Alkyl halides like NaC1 and KCl show this type of defect. centres ale the sites from where anions are missing and the vacant sites are occupied by electrons. F-centres contribute colour and paramagnetic nature of the crystal [F stands for German wod Farbe meaning colour).

Metal excess defect due to presence of extra cations at interstitial sites, e.g., zinc oxide is white in colour at room temperature. On beating, it loses oxygen and turns yellow.

Met excess defect

(ii) Metal deficiency defect due to cation vacancy It is due to the absence of a metal ion from its lattice site and charge is balanced by ion having higher positive charge. Transition metals exhibit this defect, e.g., FeO, which is found in the composition range from Fe0.93 O to Fe0.96O.

In crystal of FeO, some Fe2+cations are missing and the loss of positive charge is made up by the presence of required number of Fe3+ ions.

Classification of Solids on the Basis of Electrical Conductivity

Classification of Solids on the Basis of Electrical Conductivity

[The electricity produced on heating a polar crystal is called ‘pyroelectricity’.]

When mechanical stress is applied on polar crystals, electricity produced due to displacement of ions is called ‘piezoelectricity’

Semiconductors

Electronic conductors having electrical conductivity in the range of 104 – 107 Ω-1 cm-1 are known as semiconductors. Examples Si, Ge Sn (grey), Cu2O, SiC and GaAs.

Intrinsic Semiconductors

Pure substances that are semiconductors are known as Intrinsic Semiconductors e.g., Si, Ge

Extrinsic Semiconductors

Their conductivity is due to the presence of impurities. They are formed by doping. It is defined as addition of impurities to a semiconductor to increase the conductivity. Doping of Si or Ge is carried out with P, As, Sb, B, Al or Ga.

(i) n·type semiconductors Silicon doped with 15 group elements like phosphorus is called ntype semiconductor. The conductivity is due to the presence of negative charge (electrons),
(ii) p·type semiconductors Silicon doped with 13 group element like gallium is called p-type semiconductor. The conductivity is due to the presence of positive holes.

• Some typical 13-15 compounds are InSb, AlP and GaAs and SOme typical 12-16 compounds are ZnS, CdS. CdSe and HgTe.
• These exhibit electrical and optical properties of great use in electronic industry.

Magnetic Properties of Solids

Solids can be divided into different classes depending on their response to magnetic field.

1. Diamagnetic Substances

These are weakly repelled by the magnetic field and do not have any unpaired electron, e.g., TiO2, V2O5, C6H6, NaCI, etc.

2. Paramagnetic Substances

These are attracted by the magnetic field and have unpaired electrons These lose magnetism in the absence of magnetic field, e.g., O2, Cu2+, Fe3+, etc.

3. Ferromagnetic Substances

These are attracted by the magnetic field and show permanent magnetism even ill the absence of magnetic field e.g., Fe, Co and Ni.

4. Anti-ferromagnetic Substances

These substances have net magnetic moment zero due to compensatory alignment of magnetic . moments, e.g., MnO, MnO2, FeO, etc.

5. Ferrimagnetic Substances

These substances have a net dipole moment due to unequal parallel and anti-parallel alignment of magnetic moments, e.g., Fe3O4, ferrites, etc.


The Solid States Chemistry Notes Download PDF

Important Links

NCERT CBSE Notes Class 6 - 12 Download pdf

Ncert Solution for class 6 to 12 download in pdf

CBSE Model test papars Download in pdf

NCERT Books for Class 1- 12 Hindi & English Medium

Mathematics Biology Psychology
Chemistry English Economics
Sociology Hindi Business Studies
Geography Science Political Science
Statistics Physics Accountancy

CBSE Syllabus Class 9 to 12 Year 2021-22

Last year CBSE Question paper

Important Links

Follow Us On

Face book page ncerthelp twitter page youtube page linkdin page

Solved Last Year Question Paper

If You have any problem/query related to above page please send us your Query to ncerthelp@gmail.com with code Serial No1750/1099. Thanks

Please Share this webpage on facebook, whatsapp, linkdin and twitter.

Facebook Twitter whatsapp Linkdin

Copyright @ ncerthelp.com A free educational website for CBSE, ICSE and UP board.